Click to enlarge

J943/P1057/P1071 & J949/P1078

The standard silver design. These were sold with the other denominations for $15. To view a complete set, click here.

Three different obverse dies exist for this. On two, liberty is incuse and on the third, liberty is in raised letters. None have Barber's initial 'B' in the folds of the ribbon at the back of Liberty's cap.

These were struck in the following combinations:

This has the tip of Liberty's cap under the "S" in "States" and liberty is in incuse letters.



Silver with reeded edge J939/P1052 This is fairly common.

Silver with plain edge J940/P1053 with less than a dozen known.

Copper with reeded edge J941/P1054 with only 3 or 4 known.

Copper with plain edge J942/P1055 This is unconfirmed.

Aluminum with reeded edge J943/P1057 This is unconfirmed.

Aluminum with plain edge J944/P1058 This is unconfirmed.

This second set uses an obverse with the head aligned more like the one used in 1869. The tip of Liberty's cap is under the "E" in "States". Liberty is again in incuse letters.



Silver with reeded edge J939/P1066 This is fairly common.

Silver with plain edge J940/P1067 This is unconfirmed.

Copper with reeded edge J941/P1068 with only 4 or 5 known.

Copper with plain edge J942/P1069 with only 4 or 5 known.

Aluminum with reeded edge J943/P1071 with at least 3 known including the illustrated example.

Aluminum with plain edge J944/P1072 with at least 2 known.

The third type has Liberty in raised letters.

There are actually 2 dies like this. The first is the die of 1869 with point of crown under the letter 'E'.



The second is the die of 1870 with point of crown under the letter 'S'.



These are believed to have used the second die but it would not surprise anyone if some of these were struck using the first die.

Silver with reeded edge J945/P1073 This is fairly common.

Silver with plain edge J946/P1074 with about a dozen known.

Copper with reeded edge J947/P1075 with only a half dozen or so known.

Copper with plain edge J948/P1076 with only a half dozen or so known.

Aluminum with reeded edge J949/P1078 with only 2 or 3 known including the corroded Superior 1/96, Morgan-StacksBowers 8/19 ANA, Heritage 1/20 FUN and 1997 ANA pieces.

Aluminum with plain edge J950/P1079 which is possibly unique.

An incomplete lead reverse die splasher of the precursor to the reverse die used on these JA1870-1/P3386 is also known.